Shanghai Hongshi Mechanical Co., Ltd
Shanghai Hongshi Mechanical Co., Ltd Honest Win-Win High-Quality Low Price Long-Term Cooperation
Add to Cart
Auto Brake Parts Ford S-Max Land Rover S60 1.5L 2.5L (2006-) 1380046
OE Number Or Parts Number And Testing
| Model No | DBQ2010 |
| OE NO / (Part number) | 6G9N2C375DB / 1404955 / 1380046 / 1864276 / 1434815 / 1434812 / 1405509 / LR027107 / LR000470 / 31400764 / 30769061 / 986479620 / 0986479620 / BG4123 / BG4119 |
| Test capability | Abrasion resistance,OK. |
| Power | Strong durability |
| Inspection | 100% inspection |
| warranty | 12 Months / 10000 km |
Fit Model
Structure
Disc brakes (discs) are divided into solid disc (single disc) and duct tray (double disc). Solid plate we are easier to understand, plainly, is solid. Ventilation disc (Vented Disc), as the name suggests has a ventilation effect. From the outside, it has a lot of holes in the circle to the center of the hole, known as the duct. Car in the exercise through the air duct air convection, to achieve the purpose of heat, than the solid heat effect is much better. Most of the cars are precursor, the use of frequency counters on the front plate wear a larger, so the use of the former duct plate, after the solid disk (single disc). Of course, there are before and after the duct dish, but the manufacturing cost is not bad outrageous.
The first picture in this article is a punched scribe plate, its braking performance and heat a certain increase, but the brake pads have a greater wear and tear. DIY modified brake discs, Tips: 1. The material must be good enough, not too much impact on the strength of the defects, such as large pores, trachoma, do not allow the existence of loose loose. 2. hole spacing and size distribution, etc., because more than a hole drilling, where the strength of the weak a bit. Such as disk broken, the consequences could be disastrous. Symmetrical homogeneous Such as the balance of the disk was seriously damaged, in the process of driving the spindle will have a certain impact. 3. This is a hard work, cautious and cautious. If there is no professional guidance, it is best not to recklessly.
Punching brake discs, also known as "high-speed disk" or "modified disk", are generally assembled in high-performance cars, like cars, sports cars or sports cars. With the rise of the domestic car industry in recent years the rise of the wind, there are many riders DIY DIY, from a variety of ways to get punched crossed brake disc and then hands-on dress. Punching brake disc is a double-edged sword, his benefits and the coexistence of the same, but this brake disc on the brake pads will increase the wear and tear on the brake disc material with the processing requirements are relatively high.
Advantage
1, disc brake has a good heat dissipation performance, not because of high-speed brake and production
Heat shock recession; In addition, the disc brake will not be due to continuous brakes caused by brake failure phenomenon, to ensure safe driving; disc brake drum drum structure is simple, easy maintenance.
2, we use advanced automation technology to ensure that the product in the production process of consistency and high quality.
3, we provide customers with personalized custom packaging, neutral packaging and other services. satisfy customer's request.
